Other
$20.00
RockShox 35mm Seal Kit
$19.95
These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length.
- Designed for M8 x .75 thread pitch
- 10mm long
- 4mm hex head
- Bolt length is laser engraved onto the bolt head for easy length identification
- 6-7 Nm installation torque with light grease on threads only
$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
- Weight: 12g
$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt
$17.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$16.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands
$16.99
QUICK-LINK
FEATURE
- Tool-free assembly (possible)
- Non-reusable
- TL-CN10
BENEFIT
- Easy connect
- Compatible with current 11-speed chains
- Quick assembly tool
$16.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with Shimano, SRAM, and KMC 11-speed chains
$16.00
RockShox Volume Reducer Kits
$16.00
RockShox 30mm Seal Kit
$15.00
RockShox Reverb Service Kit Includes O-Rings only
$15.00
RockShox Reverb/Reverb Stealth IFP (Upgrade For A1 and A2 post)
$15.00
RockShox 28mm Seal Kit
$15.00
RockShox 32mm Seal Kit
$15.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
- RockShox Reverb Stealth Short Hose Barb Assembly
$14.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar
$14.99
Get back on the trail with a quality replacement hanger.
- 30mm washer provides full coverage over ABP bearing seals
- Included attachment hardware is reverse threaded
- For specific compatibility concerns, please contact our Customer Service team
- Hanger can be used on standard SRAM UDH set ups with 25mm washer
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$12.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip
$12.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$11.99
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
$11.00
Replacement lower hardware for Rockshox forks.
$11.00
- Width: 5.8 mm
- Drivetrain Speeds: 11
- Color: Silver
- Reusable: No
$10.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$9.00
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack
$9.00
- Use without washers for two chainrings, with washers for one DH ring
- Bolts and nuts use hex keys
- Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers
- Length: 8mm
- Material: Steel
- Type: Hex
$8.50
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases.
Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
Key features:
- Bases for use with Elite stem
- Add any XXX accessory mount for an elegant integrated look
$8.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$7.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
$7.00
- Length: 8 mm, 5.5 mm
- Material: Steel
- Type: Hex
- Set of 4 x 2
$5.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
$4.99
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes
$4.50
- From a long line of tough, light-weight chain engineering from SRAM
- Chain connector type: PowerLock
- For Use with SRAM 12-Speed Road Chains Only
- No tools necessary to install
- Chain connector qty/packaging: 4
$4.00
Eyelet Bushings for repair and maintenance of Rockshox rear shocks.
$3.99
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$3.41
Flat head screws from Wheels Manufacturing.
$2.80
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
Page 1 of 2
Next page